Manufacturer research Specifications checked 2026-10-22 US model

BLUETTI Elite 100 V2

The Elite 100 V2 combines a 1,024 Wh battery and 1,800 W AC output with a documented 1,000 W solar-input ceiling. Its lower listed weight makes it worth comparing with the older AC180 when carrying and solar charging matter.

Is it right for your household?

Where it fits

Selected 120 V essentials with verified running and startup requirements.

When to consider another option

240 V loads or a whole-home installation requirement.

More fit considerations

Other situations to consider

  • A household comparing carrying weight against the older AC180.
  • A compatible solar setup that can make practical use of the documented input range.

Other reasons to choose a different setup

  • A plan depending on directly attached battery expansion that is not documented in this record.
  • More base energy if your loads cannot fit within a realistic one-kilowatt-hour plan.

Manufacturer specification record · No hands-on testing · Source records checked between 2026-10-04 and 2026-10-22

Solar input is the clearest difference to examine

The US manual lists up to 1,000 W PV input within a 12–60 V, 20 A range. That is a higher input ceiling than the base DELTA 3 or AC180 records. It does not mean the station will receive 1,000 W in typical weather. Panels, wiring, connector compatibility, temperature, and orientation determine what can actually be used. Verify the entire charging setup before buying panels.

A lighter unit with less base capacity than AC180

The Elite 100 V2 is listed at about 25.3 lb, versus about 35.27 lb for AC180. Its nominal energy is 1,024 Wh, versus AC180’s 1,152 Wh. That is a real tradeoff: easier carrying and a higher solar-input ceiling may matter more to one household, while another may prefer the extra base capacity of an older unit. Neither difference establishes delivered runtime.

Treat boosted output and surge as separate claims

The manufacturer’s technical table lists 3,600 W surge separately from the Power Lifting feature. The manual describes Power Lifting for pure resistive loads while actual AC output remains at the rated limit. Do not use that feature as a general promise that refrigerators, pumps, or other motors will start. Check the load’s startup requirements and follow the manufacturer’s instructions.

Verify transfer tolerance and placement

The documented UPS switching time is 10 ms or less. Critical devices may require a different backup design, so verify their interruption tolerance rather than relying on the UPS label. Plan a dry, ventilated operating location, suitable cable routing, and a way to test your intended equipment before depending on it during an outage.

Check the V2 listing and what is included

This guide covers Elite 100 V2, not similarly named Elite models or a solar-panel bundle. Confirm the exact model and seller, the cables supplied, current warranty conditions, and return terms. No directly attached expansion capacity is established by this record; an external charging source is not automatically a larger integrated battery.

Specifications & sources

These are manufacturer specifications, not independent performance measurements. Source records checked between 2026-10-04 and 2026-10-22. We have not tested this model hands-on.

Nominal capacity

1,024 Wh

Checked 2026-10-22. Source for Nominal capacity (opens in a new tab)

Battery chemistry

LiFePO4

Checked 2026-10-04. Source for Battery chemistry (opens in a new tab)

Continuous AC output

1,800 W

Checked 2026-10-22. Source for Continuous AC output (opens in a new tab)

Surge output

3,600 W

BLUETTI's US technical specifications list 3,600 W surge separately from 2,700 W Power Lifting; these modes are not interchangeable or a load-start guarantee.

Checked 2026-10-04. Source for Surge output (opens in a new tab)

US AC outlet count

Not verified in this source record

US manual confirms AC outlets but does not give a textual count in the specification table; count not entered without verifiable text.

Checked 2026-10-04. Source for US AC outlet count (opens in a new tab)

240 V AC output

No

AC output is 120 V, 15 A maximum.

Checked 2026-10-04. Source for 240 V AC output (opens in a new tab)

Maximum solar input

1,000 W

12–60 V, 20 A maximum.

Checked 2026-10-22. Source for Maximum solar input (opens in a new tab)

Maximum documented expanded capacity

Not verified in this source record

Manual documents solar and DC charging inputs, not directly attached battery-capacity expansion; separate Charger/B300K bundles do not establish an expansion ceiling.

Checked 2026-10-04. Source for Maximum documented expanded capacity (opens in a new tab)

Transfer / switching time

10 ms

Manufacturer specifies UPS switchover at or below 10 ms; not a guarantee for any connected device.

Checked 2026-10-04. Source for Transfer / switching time (opens in a new tab)

Base-unit weight

25.3 lb

Approximate US manual weight; the US product page rounds this to 25 lb.

Checked 2026-10-22. Source for Base-unit weight (opens in a new tab)

Listed warranty term

5 years

US technical specifications list five years.

Checked 2026-10-04. Source for Listed warranty term (opens in a new tab)

Research notes & original documents